The sawdust briquette machine is the most important equipment in the mesin arang equipment, and it is the semi-finished mechanism carbon. If there is a problem with the equipment, it will not be able to produce, and if there is no way to produce it, it will not bring good benefits to the enterprise. What problems need to be repaired in the briquette machine? Let me tell you a little about everyone.

What kind of problems occurs in the sawdust briquette machine?

1. In the process of making a sawdust briquette machine, how to carry out maintenance when there is smoke? In the case of this situation, it is necessary to check the optical machine to see if the raw material is too humid. If the humidity is too high, the humidity of the raw material should be 8% to 12%. If it is not the problem of humidity, Look at the end face of the recommender for wear and wear. If the end face is worn, smoke will also appear. If the propeller is worn, it must be repaired.

2. In the process of making the sawdust briquette machine, the rod produced does not form. In the case of non-formation, it is necessary to check the heating coil of the rod making machine. Check whether the heating coil can be heated. If it cannot be heated, it is necessary to exchange the heating coil for work.

3. When the production is in the process of the shutdown, how to carry out maintenance, this is to see if there is a problem with the circuit, if there is a problem with the circuit, timely maintenance.